There are some names for blow-off valves (Bovs): they are sometimes called compressor bypass valves, air by-pass valves, or bypass valves. Generally, their purpose is to publish pressure from the intake of your turbocharged car after you let off the gas. This publish of air creates the preponderant "psshh" sound turbo cars are so often connected with. Bypass valves (Bpvs) do the same thing, any way they recirculate the released air back into the intake.
Why would you want a Bov? - Bovs protect against something called compressor surge, which is when the pressure in the intake after you let off the gas sends an air wave back to the turbo, which can damage it over time.
Do not let this make you think you admittedly need one, however. Most turbo cars, such as the Subaru Impreza Wrx I will use in this example, have a stock bypass valve that is designed for the levels of boost the car is running regularly that will work perfectly. The only fancy you would want to upgrade to an aftermarket Bov is if you want to run quite a bit more boost than stock (20psi on the Wrx). At this point, the compressor surge can be greater than the stock Bpv can handle.
Problems: There is one determined qoute that aftermarket Bovs can create. The air that they publish has already been measured by the mass air sensor, so when this air is gone after the Bov blows off, the Ecu will be injecting the wrong whole of fuel, causing the machine to run rich for a second. This can damage the catalytic converter after time. This can not be fixed with machine management.
Take all these factors into notice before buying a Bov. Happy modding!
What Is A Bov, What Does It Do, And Do I Need One?Central Air Compressor Troubleshooting Absolute Encoders Refrigeration Compressor Troubleshooting